Floating Screed System

The Floating Floor system is suitable for domestic as well as  commercial applications. For domestic applications this can be  chipboard or plywood, for commercial installations we recommend 25mm  thick dry flooring elements. Polystyrene panels are pre-routed in different patterns  and are laminated with a strong aluminium foil. The foil diffuses the  heat uniformly across the entire floor surface, the response time is  significantly reduced compared to traditional wet screed systems due to  the lower thermal mass. This dry system is ideal for installations where a  finished floor is required within a minimum time frame. No wet trades  are involved, making it a very fast system to install and removes the  need for other building trades. Floating Screeds are laid on insulation to provide an insulated floor area. All walls and pillars must be lined with edging foam or 20mm insulation, such as kingspan, to protect against shrinkage cracking.

Suitable for both new build and refurbishment projects, systems are available in a range of combinations and system depths and offer extremely high standards of acoustic control. The innovative cradle and batten systems also offer the ability to be levelled on site to eliminate variations in the structural floor surface and provide access for services. The screed can be laid thinner than conventional screeds and up to 1000m per day at 30mm can be achieved, thereby making it highly competitive in overall time and cost savings compared with conventional sand and cement screeds.

All our floor screeders are equipped with laser levels to achieve a perfectly flat finish to the required level.`
Top quality floor layers can easily achieve a surface regularity of SR1.

Back to Home

Online Quotation